Bolt Actions

This is another one of my homemade guns. I built this target pistol about four years ago. This single shot bolt-action pistol is chambered in 22 Long Rifle (22 LR). Initially I had a 4x scope on it, and later a red-dot scope. I finally settled on some Remington 700 iron peep sights. The barrel is a green mountain blank (1:16 twist) match barrel that is approximately 4.5 inches long. The pistol grips are polyurethane coated Walnut. The pistol grip portion is made from Aluminum while the receiver and upper components are made from steel. The pistol has two forward locking lugs and is cock on open. The gun uses a simple trigger mechanism inside homemade trigger housing. The lower aluminum portion is coated with powder coat and the upper steel section has been cold blued. This has been an accurate pistol, with good 50 yard. I have several other homemade guns, if this is something you like please let me know and I will make more videos. Let me know in the comments if you have any questions. Thanks, be safe and God bless.

This is another one of my homemade guns. I built this gun about three years ago. This single shot bolt-action rifle is chambered in 35 Remington and was designed and built specifically as a medium game hunting rifle. I had read about and heard about the 35 Remington round all my life and I had heard it was an excellent brush gun for deer and pigs. The stock has a boiled linseed finish on an ebonized Walnut stock. I wanted a black on black look for hunting purposes. The stock has a grind to fit Pachmayr buttpad and uses modified Remington 700 iron sights. The stock has a lower comb for iron sight shooting. The barrel is 21" long and was made from a Shilen barrel blank (1:14 twist). It has two forward locking lugs, an extractor and uses a unique trigger mechanism inside a homemade trigger housing. The outside coating is 44/40 cold gun blue. I made a paracord sling to go with this gun. I have several other homemade guns, if this is something you like please let me know and I will make more videos. Let me know in the comments if you have any questions. Thanks, be safe and God bless.

This is another one of my homemade guns. I built this gun about nine years ago, so don’t be to judgmental. This single shot bolt-action rifle is chambered in 22 Hornet and was designed and built specifically as a minimalist rifle. I really just wanted to have and shoot the 22 Hornet cartridge that I had read and heard about all my life. The simple stock has a boiled linseed finish and is made from Kentucky Coffee wood with a Walnut endcap. The stock has a grind to fit Pachmayr buttpad and uses a modified AK pistol grip. The barrel is 17" long and was made from a Green Mountain barrel blank (1:14 twist). It has two forward locking lugs, an extractor and uses a modified AR trigger mechanism inside a homemade trigger housing. The outside coating is aluma-hyde. It is an accurate rifle with many MOA groups at 100 yards. I have several other homemade guns, if this is something you like please let me know and I will make more videos. Let me know in the comments if you have any questions. Thanks, be safe and God bless.

This is the newest firearm that I’ve added to my collection. This is a custom single shot, cock on open 22 rifle. The barrel has a 1:16 twist and is using a Green Mountain barrel blank. The barrel is 16.25” long and is octagon shaped. This gun has bespoke iron sights, one of a kind sling mounts and a custom paracord sling. The stock is based off of a Mauser 98, but has been personalized to my specifications. The stock is made from American Walnut and uses a boiled linseed finish with red dye added. The butt plate, end cap and pistol grip cap are all brass. The gun shots 22LR and 22 short and has proven very accurate with the correct ammunition. I took it to the local range and shot several different types of 22 ammo through it. I show you how to field strip the gun down for cleaning. Let me know if you have any questions in the comments. Be safe and God bless.

This is another one of my homemade rifles. This is a bolt action 222 that uses an internal magazine. The rifle is inspired by Jeff Cooper’s scout rifle idea. There is a forward mounted red dot. The barrel is 18” long and is 1:14 twist. The barrel was a Shilen barrel blank. The stock is made of mahogany and has been coated with boiled linseed oil and red dye. The buttpad is brass and the stock has a walnut endcap. The trigger mechanism is unique and inspired from a Bill Holmes design. Let me know if you want to see more. Be safe and God bless.

This is another one of my homemade guns. I built this rifle about ten years ago. This single shot bolt-action rifle is chambered in 308 Winchester. Initially I wanted a 308 for accuracy testing, and it originally had a Remington Model 700 308 Barrel. I later replaced with barrel with the Shilen (1:10 twist) match barrel that is approximately 16.5 inches long. The stock has a polyurethane finish on a Kentucky Coffee Tree stock. The stock is beginning to crack so I would not suggest this wood for gun stocks that will take any recoil. The stock has a grind to fit Pachmayr buttpad and is fitted with a 9x Leupold Scope. The stock utilizes an AK pistol grip. The rifle has three forward locking lugs and a unique extractor. With the 3 lugs the receiver is longer than normal. The gun uses a simple trigger mechanism inside homemade trigger housing. The outside coating is alumahyde and the internal metal is all left in the white. This has been a very accurate gun, with some 100 yard groups at ½ MOA. I have several other homemade guns, if this is something you like please let me know and I will make more videos. Let me know in the comments if you have any questions. Thanks, be safe and God bless.

This is another one of my homemade guns. I built this gun about eight or nine years ago. This single shot bolt-action rifle is chambered in 9mm Luger and was designed and built specifically to be a gallery gun or a youth gun. I wanted a short action, low recoil rifle. The receiver is unique in that it is square, with a square bolt inside it. The stock Kentucky Coffee tree with a grind to fit Pachmayr buttpad and uses an AK style pistol grip. It has a 3MOA Burris red dot. The barrel is 16.5" long and was made from a Green Mountain barrel blank (1:10 twist). It has two rear locking lugs/wings, an extractor and uses a unique trigger mechanism inside a homemade trigger housing. I have several other homemade guns, if this is something you like please let me know and I will make more videos. Let me know in the comments if you have any questions. Thanks, be safe and God bless.

Let me know in the comments if you have any questions. This is another one of my homemade guns. This single shot bolt action rifle is chambered in 222 Remington and was designed and built specifically as a benchrest rifle. It has a cock on open bolt action with an extractor. The stock is made from American Cherry with a Mahogany endcap and a boiled linseed finish. The stock has an adjustable comb and was inspired by the McMillan A-4 stock. It has a grind to fit Pachmayr buttpad. The barrel is 22" long and was made from a match stainless Shilen Barrel blank (1:14 twist). The barrel has a T51 muzzle brake to attach a suppressor. It has two forward locking lugs and a rear safety locking lug. The trigger mechanism is inspired by a Winchester design. It is a very accurate rifle with mostly sub MOA groups. I have several other homemade guns, if this is something you like please let me know and I will make more videos. Let me know in the comments if you have any questions. Thanks, be safe and God bless.

This is a new video on an old video. I wasn’t happy with the audio on the old video. This is another one of my homemade guns. This single shot bolt action rifle is chambered in 6.5 Creedmoor and was designed and built specifically as an American Sniper inspired rifle. It has a cock on open bolt action with an extractor. The stock is made from American Walnut and has been camouflage spray-painted using a brushstroke Freedom Stencils design. The stock has a grind to fit Pachmayr buttpad. The barrel is 22" long and was made from a match stainless Shilen Barrel blank (1:8 twist). It has a paracord camouflaged sling. It has two forward locking lugs. It is an accurate rifle with many sub MOA groups. I have several other homemade guns, if this is something you like please let me know and I will make more videos. Let me know in the comments if you have any questions. Thanks, be safe and God bless.

This is the version YT pulled. This is another one of the guns from my collection. I made it probably five years ago. This single shot rifle is chambered in the 218 Bee caliber. It has a trigger housing and trigger safety. The stock is inspired by the Mannlicher style (or the gun stock war club look) and is made of Walnut and has a poly Tung oil finish. The action is cock on open and the rifle does have an extractor (no ejector). The barrel is 21" long and was made from a Green Mountain Barrel blank (1:14 twist). It has two locking lugs and one safety lug. I have had several good (1 MOA or less) 5 shot groups at 100 yards with this gun. If this is something you like let me know and I will make more videos. Be safe and God bless.