Gun Maintenance, Modifications and Special Projects

A quick demonstration of removing and reinstalling the integral Insight Laser, replacing the batteries and re-aligning the laser after its been re-installed.

Short video, 1st time trying this, but it came out really good! This paint drys really quick and I did not overspray onto the car thats 20" down the driveway.... My boxer on the other hand.... lol

Follow-up to my previous video addressing the need for quality wrench to install the Aero Precision Enhanced Barrel Nut. This is the one you need!! Check it and other products from this video out at the links below!! Wheeler AR Combo Wrench https://alnk.to/cHOr9RI Wheeler Delta Series Vice Block https://alnk.to/e78v0pB Fix-It-Sticks Optics Tool Kit https://alnk.to/btp8idc Aero Precision Enhanced Handguard and Barrel Nut https://alnk.to/gVMCHwE

This is the .44mag Taurus Tracker from my review that had the fired cases sticking in the chambers. I'll be using the Flex Hone brushes to Hone and polish the interior of the cylinders. See the Flex Hone Brushes here... https://alnk.to/613cSNB

I had one of my reloads fail to chamber in the new Lone Wolf threaded barrel over the weekend because of a slight bulge in the base. After I got back to the shop, I dropped the round into the BCA threaded barrel and it plunked right in. I decided to check all 4 of the G19 barrels to see how much difference there was in between each of them.

This video is a re-post. YouTube moved it to limited ads so I had to pull it down, revise and upload again. I picked up this CVA Scout Take Down in .444 Marlin from my local gun store several weeks back. For some reason, CVA has been drilling and tapping all their barrels for a front sight, even though not installing front sights on them, leaving a gapping threaded hole in bare metal at the front of the barrel. I reached out via their customer email interface and they immediately put 2 screws in the mail! I'd still prefer it have not been drilled at all but it beats nothing.... While I had it on the bench, I also checked the equipment rail screws for lock tight and proper torque before mounting my optic.... Always do this guys! lol

I picked up this Taurus 444 Raging Bull, in .44mag, to use in my gel block testing. I got it used from a local gun shop and once I started shooting it, noticed some odd characteristics that were confirmed by bullets I pulled out of the gel block. I immediately emailed Taurus with a description of the issue and ample pictures showing the problem but eventually they told me I had no warranty claim because I used re-loaded ammunition. #taurus #44mag #revolver #magnumrevolvers #reloadingbench #rangetime #kyrangetime #gunsmithing #qualitycontrol Product links.... Brownells, Revolver Range Rods..... https://alnk.to/8ELeZOO Garmin Xero Pro C1 Chronograph https://alnk.to/4fSitvh

Cooking in the paint on the barrel a bit!!

This is my 2nd most watched YouTube Video and YT wouldn't fully monetize it. And, no the overspray didn't go on the car. Flat paint dries to a powder with-in 10-12" of being sprayed. You can see the powder on the cardboard. lol