580W Solar Light Tower - 30' Tower - 14' Trailer - (4) LED Lamps - 4kW Generator - Timer/Sensor

https://www.larsonelectronics.com/product/235329/580w-solar-light-tower-30-tower-14-trailer-4-led-lamps-4kw-generator-timer-sensor

The Larson Electronics SPLT-.53K-LM30-4X60LTL-ISDG-AT.DNS-TLR14 Solar Light Tower provides a safe and effective way for operators to quickly deploy 400 watts of intense LED illumination to elevations up to thirty feet. This solar light plant features a telescoping light tower that folds over for easy transportation, features a rotating boom that allows for 360° of rotation, and a removable mast head for storing the four LED light fixtures when not in use. Equipped with a 4kW backup diesel generator, the unit features two, 265-watt solar panels and a 200-amp capacity battery bank. The entire assembly is mounted onto a 14` single axle trailer, allowing operators to transport this solar light tower from location to location.

Solar Powered Light Tower: This solar light tower includes two solar panels, solar charging system, battery bank, backup diesel generator, four LED lamps with auto timer/sensor and a manual crank-up mast mounted on a 14' trailer with outriggers. This 0.53KW solar generator system replenishes amp hours of usable battery capacity per day, assuming 5.5 hours of peak charging sunlight. This system delivers 24 volts for lighting mounted atop the 30` telescoping light mast.

Light Mast: This telescoping five stage steel light mast from Larson Electronics’ is designed to allow operators to quickly and safely deploy the four LED light heads in locations where this equipment must be elevated to heights up to 30` for effective coverage. This light boom can be extended to 30` above the trailer floor for maximum area coverage, and collapsed to 13.5` for applications where a smaller footprint is required. The tower is constructed of square steel tubing with a base section 6.6` in length and 6" by 6" by 3/16" thick, lower section 6.78` in length and 5" by 5" by 3/16" thick, middle section 6.93` in length and 4" by 4" by 1/8" thick, upper section 7.08` in length and 3" by 3" by 1/8" thick, and top section 7.58` in length and 2" by 2" by 1/8" thick. Each section has a 1`+ overlap. The mast is extended to its full height using an included 1,000lb rated hand winch with 3/16" galvanized steel cable.

A 44" wide and 2" by 2" by 1/4" thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for the equipped LED light fixtures. When elevated to its full upright position, the mast can be rotated a full 360°. By loosening the T-Handle, operators can rotate the mast with easy in either direction. The mast can be positioned in one of four different positions, and locked back in place by re-tightening the T-handle. The mast itself spins freely with easy, and can typically be rotated with a single hand. The LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics.

Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1