PROA7 and PROA7PLUS: Controlling the Panel Volume

In this video, Darrell from Alarm Grid shows you how to control the volume on a PROA7 or PROA7PLUS alarm panel. The same steps can be used to control the volume on a PROA7C and a PROA7PLUSC.

First of all, only the volume for announcements such as chime sounds and voice chime, arming and disarming announcements, and other status announcements can be controlled. Alarm and trouble sounds use a preset volume that cannot be controlled by the end user.

To change the panel volume, touch the tab at the top center of the panel's touchscreen. A menu will drop down. The volume is controlled by a slider located on the right side of the menu screen. As you slide the volume bar left and right, left to lower the volume, and right to raise it, you will be provided with a sample sound so that you determine the right volume level for you. Once you are satisfied with the volume setting, you can select the X in the upper right side of the screen to close the menu. Settings are automatically saved.

In addition to panel volume, screen brightness can also be edited on this menu screen. It is also adjusted using a left and right slider. Chime and Voice can be toggled on and off, as can Alexa. The status for the system battery, cellular communicator, Bluetooth, AC Power, and WIFI can be seen in the upper left side of the screen. At the lower right you'll see an option for "Clean Screen". Touching this will provide a 30 second countdown window in which you can wipe the screen without performing any touchscreen inputs to the system. At the end of 30 seconds, the system goes back to normal.

https://www.alarmgrid.com/faq/how-do-i-turn-down-the-volume-on-a-proa7-or-proa7plus

http://alrm.gd/get-monitored