Harvest Right Vacuum Error #9 - Part 9

We have started getting vacuum error #9 during the freeze and dry cycles.

In this series, we will be going over the steps we are taking to solve this problem.

We fixed the vacuum leak and on the 1st successful batch, we noticed the oil was cloudy.

We drained the oil into the filter and put in clean oil for the last batch.
In the video, we show you what it looked like coming out of the pump and after it went through the filter.

Subscribe to my YouTube Channel 👇
https://tinyurl.com/Learn-To-Fix-It-Yourself

I have seen lots of posts about this same error, and some still don't have any solution for the problem.
👉 The Freeze Dryer we have was manufactured in April 2022.
👉 We have only had it for a few months
👉 Currently we have completed 58 batches

We start out with the basic checklist and then work into the other possibilities.

Follow the series to see how it turns out.

✅ Part 1 - basic troubleshooting - https://youtu.be/pL_B77mMNqY
✅ Part 2 - checking for epoxy leak and off-gassing. - https://youtu.be/TTfgsNdSCeY
✅ Part 3 - Testing the vacuum leak - https://youtu.be/ecSMyqsmbU4
✅ Part 4 - Sensor leak finally fixed but still not working https://youtu.be/jeRfDPp9dRQ
✅ Part 5 - Fixing still another leak - https://youtu.be/TnxwgKsYhJI
✅ Part 6 - Putting epoxy on the wires - https://youtu.be/HeJpmn-mdgE
✅ Part 7 - Epoxy the connector - https://youtu.be/4tzT1Zx5Agk
✅ Part 8 - Second batch completed - https://youtu.be/CIbHO-QiWzk
✅ Part 9 - Cloudy oil - https://youtu.be/HLe7heW3o9Q