We revisited an old but good sustainable hunting site after a two year absence. Alas, it had been hunted out and this was really annoying as this was clearly due to greedy hunters.

REXIMEX RP 0.22 Cal made in Turkey, basically a copy (looks pretty good) of the Russian made ATAMAN P16

Shooting 23gr slugs from a REXIMEX RP 0.22 Cal PCP pistol. Yes, It can be done. We tested this without cheating, just out of the box, no regulator adjustment and it grouped within a 4cm circle at 25m. This is pretty poor but remember the rifle/pistol was handheld and it was untuned for slugs.

My thoughts on the Helikon Tex carbine sling

How to replace the O-rings in an AirForce Air guns Talon P PCP rifle breech.

Purely for entertainment and I have been somewhat vague about the construction however, the Zoraki HP01-2 ULTRA, this works extremely well and is not only very quiet but does not hinder the accuracy of the projectile.

A silencer for a PCP need not be complicated internally at all. A simple orifice plate and a tubular construction which prevents internal air turbulence is all that is needed in order to reduce the SPL and not to interfere with the projectile trajectory. This can be seen in factory made moderators which simple consist of a "metal tube" and nothing more.

Zoraki 01-2 Ultra 22 cal Pistol Super accurate JSB 14gr pellets or 21gr slugs

A very small impact detonated charge was placed on an airgun target. The whole point was to test if the force of a airgun pellet could detonate this material. Which obviously it could. You can see small fragments of wood being blown out at impact. The noise is just louder than the suppressed airgun, because this would defeat the purpose of noise suppression.

Shooting slugs with a powerful Air pistol

Filling the magazine correctly.

Nielsen equipment. Nielsen make all sorts of silencers/moderators for firearms of any caliber and are specialist gun smiths.

Some basic physics of understanding how an orifice plate reduces or suppresses sound levels from a silencer or moderator.

Some basic calculations with reference to PCP air rifles.

For the correct servicing of O-rings, one must understand that not all Silicone grease formulations will be suitable and in fact some can actually damage the rubber compounds of those O-rings. In this video I explain this in relation to servicing the O-rings of a PCP air rifle but the same holds true for say servicing the O-rings of an underwater camera or dive light.

If you want a no nonsense way to clamp an action camera to your rifle's picatinny rail, simply use a NATO clamp and a mini arm like that of Manfrotto.

How to use sponges and high quality camouflage paints to custom camouflage your rifle. Unless you own a dozens of guns, buying spray paint might be a waste of money if this is a one off job. Also applying spray paint must definitely be conducted in a very well ventilated area due to the large amount of excess and toxic spray generated. An alternative to using spray cans is shown in this video. It's not exactly new but maybe a forgotten technique.