IMPOSSIBLE ANCIENT MACHINE Found in AngKor Wat? Lost High Technology | Part 8 | Praveen Mohan

𝗪𝗲 𝗻𝗲𝗲𝗱 𝘆𝗼𝘂𝗿 𝘀𝘂𝗽𝗽𝗼𝗿𝘁:
If you feel this work is important to be done in the current times, please help us out in producing more such content.
► PayPal :- https://paypal.me/hindutvawadi

★ Instagram :- https://instagram.com/praveenET
★ Twitter :- https://twitter.com/IamPraveenMohan
★ Email id :- [email protected]

00:00 - Advanced Lathe Pillars
01:06 - Unknown Ancient Technology
03:18 - CNC Machines
04:20 - What's inside?
06:19 - Mysterious Shadows
08:00 - Celestial Guardians
08:40 - They are NOT Windows
09:21 - Conclusion

Hey guys, today I am gonna show you these extraordinary pillars in the ancient temple of Angkor Wat. You can see right away, that these pillars cannot be made using primitive tools like chisels and hammers, you absolutely have to use a lathe machine, a rotating mechanism to create these pillars, and experts agree that this is not possible using chisels and hammers. I have already shown you large pillars in ancient Indian temples which have been created using lathe technology, but these pillars of Angkor Wat are much more advanced - This is so advanced that it is not even possible to do it today, using the technology we have. I know that's a big statement, but if you watch till the end of the video, you may agree with me.
Look at the pillars here, there is something very strange about them, yes these marks called turn marks can be achieved only using lathe technology, but look at the other operations here, they did complex processes like thread cutting, this is the only way to achieve several little cylinders in the same shaft, they did another process called chamfering, so one part becomes bulgy while the other part is narrow. Imagine doing these complicated machining at least 900 years ago on solid sandstone blocks.
But ancient builders were not satisfied even after processing them in a lathe machine, after this, they then carved on the faces of the pillars, there are carvings in millimeters on them everywhere, but all this is not crazy, the real crazy part is that vertical groove. The vertical line that goes from top to bottom. This is impossible to achieve even with lathe technology. You cannot make vertical grooves like this, unless you use another advanced machine like an angle grinder or a circular saw today. But it is not even the vertical groove that bothers me, what is really crazy is that, this line goes from the top to the bottom, and look at the depth of that groove. This is not a fancy groove made for beauty. This is a cut, that was made deep enough to open the pillar into 4 equal halves lengthwise. Look, this is incredible, they made straight, deep lines that go from top to bottom, so they could cut the pillar open into 4 equal halves. We cannot do this today, even with modern technology. This pillar is probably 2 inches wide, imagine taking a cylinder made of sandstone that is just 2 inches wide, cut it into 4 equal halves and put it back together to make it look like one solid piece. We cannot do this today, unless we used computerized machines like CNC machines.
So, how did they cut solid sandstone lengthwise into 4 equal halves? Even more interesting, how did they glue these blocks back together so it looks like one piece even after so many centuries? Look at the perfect fitting here, this looks like woodwork, but each pillar is made of 4 joined pieces.
This is clear evidence of ancient machining technology, but there is an important question that's even more mind boggling. WHY? Why did they have to process these pillars in lathes, and then split them up, only to put them back together? It is much easier to just have it as a single piece, rather than cut it into 4 pieces and put them back together. So why did they do this?
Think about it, why would you cut something open, and then put it back together? If there is no need for it, you will never cut it open in the first place. The only reason you will do this, is if you have to put something inside.
Today, we do this all the time when we need to keep something safe. We make a secret hole, put some valuable stuff inside, and then put it back together and pretend it is a solid box, right? We have experts who make so many secret compartments in houses. It will look solid, but if you push a button, or if you use leverage, it will open up. If you see how they make these secret boxes, they take a solid piece, cut it finely, make a small room in the center, and put it back so no one can even tell that it is a container holding something inside. 99% of people will just think it is one solid piece. Is this why these pillars were cut open?

#Ancienttechnology #Cambodia #PraveenMohan