Finish the 3D Printed Part, How to Guide Step 3 | 3D Facture Draken 3D Printer

https://www.facebook.com/GarageScience/
This "How to Guide" will show you how to prepare a CAD model to be printed on a DLP/SLA resin 3D printer. The printer I use is a Draken made by 3Dfacture. I used Autodesk Fusion 360, Autodesk Meshmixer and Creation Workshop to prepare this model. All these programs are free to download and use.

Digital Light Processing Stereo-lithographic 3D printers are very good at creating high resolution prints. In many ways they are easier to use than their counterpart FDM (Fused Deposition Modeling) 3D Printers because the XYZ axes are easier to calibrate. We will be taking the 3D printed part from the printer and performing the post print processing of that print to get the final product. This will include bathing the part in isopropyl alcohol, curing it in a UV light oven and cutting off the support structures.

#garagscience #diyprofessional #creationworkshop

The model I am using is a "One Finger Knuck" from Gravelle Knives. Check out his website and facebook page linked below to get one of these made out of titantium.
http://www.gravelleknives.com/
https://www.facebook.com/Gavelleknives/

Software Links:
Autodesk Fusion 360: use download link for hobbyists and enthusiasts
http://www.autodesk.com/products/fusion-360/try-buy

Meshmixer
http://www.meshmixer.com/download.html

Creation Workshop
https://www.dropbox.com/s/duujmx2su5dxgvg/CW_Main_1.0.0.75.zip?dl=0