2GIG Edge: Entering Programming Mode

In this video, John from Alarm Grid shows you how to enter programming on a 2GIG Edge system. The 2GIG Edge is a 7" all-in-one color touchscreen system with WIFI and cellular communicators built in. It has a Z-Wave Plus V2 controller.

To enter programming, press the settings icon. This looks like a gear and is located on the lower right side of the Home screen. When prompted, enter the Installer Code. The default Installer Code is 1561. If you enter the Master Code instead of the Installer Code, you will enter the Master User menu, which offers different options, but panel programming will not be accessible from the Master User menu.

After entering the Installer Code, you'll be taken to the Installer's Menu. You may notice you have some of the same options given in the Master User menu, but there will be a number of options here that you don't see when you enter using the Master Code. Scroll down to the bottom row of the presented options. Press the Installer Toolbox icon. This brings you to the sub-menu containing Panel Programming.

Within the Panel Programming Menu, you will see options for Wireless Zones, Built-in Zones, Keyfobs, Keypads, Image Sensors, Network Settings, and Advanced Settings. Go through each menu option until you have configured your panel. In most cases, settings are saved automatically as you go (unless you see a Save button, which means you should manually save your work).

To exit programming, you can press the back arrow at the upper right side of each screen until you completely exit. You can also press the House icon in the lower right to return to the main screen.

​https://www.alarmgrid.com/faq/how-do-i-get-into-programming-on-my-2gig-edge http://alrm.gd/get-monitored

https://www.youtube.com/watch?v=0Um6EdSwhaY