These 8-blade Stealth Propellers Will Ruin Your Motors - 3D Printed Propeller adapter for DJI Mini 2

Thanks to PCBWay for sponsoring this video. Check out https://www.pcbway.com/ for custom printed circuit boards, electronics, and rapid prototyping services (Use my referral link to get $5 of New User Free Credit https://www.pcbway.com/setinvite.aspx?inviteid=493974)!

I used PCBWay's rapid prototyping service to make these propeller adapters. I'll show you what the ordering process is like in case you, too, want to use this service.
Like I said, basically, don't try this unless you want to ruin your Mavic Mini motors! the increased weight and wobble of the propellers seems to do a number on the motor bearings. There are NO performance improvements as far as I can tell, aside from reduced, or at least different, propeller noise.

00:00 BLUF
00:59 welcome back to the DJI Chop Shop
2:35 struggling to start
4:30 sound comparison
5:48 crunchy motors
6:30 ordering from PCBWay

-------------
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at http://rcwithadam.com/

Want to support RCwithAdam? ↴
KO-FI: https://ko-fi.com/rcwithadam
OR
PATREON: https://www.patreon.com/RCwithAdam
Thanks!

-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
**DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!**
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam #fpvdrone #DJI