Are The Brakes Toast On Your Ford Explorer? Learn How To Replace Them!

Welcome to our channel, where we empower you to take control of your vehicle maintenance! In this step-by-step tutorial, we'll guide you through the process of performing a brake job on a 2011-2019 Ford Explorer. Whether you're looking to save on repair costs or simply enjoy working on your own car, we've got you covered.

BUY Front and Rear Brake Pad and Rotor Kit: https://amzn.to/3MHr7ya
BUY Penetrating oil: https://amzn.to/3smTP0l
BUY Caliber Pin Grease: https://amzn.to/479TIUK
BUY Anti Seize Lubricant: https://amzn.to/3FSjWzn

🔧 Tools and Materials:

Before we dive in, make sure you have the following tools and materials ready:

New brake pads and rotors
Lug wrench
Jack and jack stands
C-clamp or brake caliper tool
Socket set
Torque wrench
Brake cleaner
Brake fluid
Safety gloves and glasses

⚙️ Step-by-Step Instructions:

Safety First: Begin by ensuring the vehicle is on a level surface, turned off, and engage the parking brake. Wear safety gloves and glasses throughout the process.

Lift the Vehicle: Use the lug wrench to loosen the lug nuts, then lift the front or rear of the vehicle using the jack and secure it with jack stands.

Remove the Wheel: Once the vehicle is securely lifted, remove the lug nuts and take off the wheel to access the brake components.

Remove the Caliper: Using a socket set, carefully remove the bolts securing the brake caliper. Hang the caliper from the suspension using a wire or bungee cord to avoid strain on the brake line.

Replace Brake Pads: Slide out the old brake pads and replace them with the new ones. Use a C-clamp or brake caliper tool to compress the caliper piston.

Inspect and Replace Rotors (if needed): Check the condition of the rotors. If they are worn or damaged, replace them with new ones. Follow manufacturer specifications for rotor thickness.

Reassemble Caliper and Wheel: Put the caliper back in place, tighten the bolts to the manufacturer's specifications, and reinstall the wheel. Repeat the process for the other side.

Bleed the Brakes (if needed): If you opened the brake system, bleed the brakes according to your vehicle's manual to remove any air from the brake lines.

Torque Lug Nuts: Lower the vehicle, and using a torque wrench, tighten the lug nuts to the recommended torque.

📌 Pro Tips:

Consult your vehicle's manual for specific torque specifications and bleeding procedures.
Perform a test drive in a safe area to ensure the brakes are functioning properly.
If you found this tutorial helpful, give it a thumbs up, subscribe for more DIY automotive content, and hit the notification bell to stay updated on our latest guides. Feel free to ask any questions in the comments below. Happy wrenching! 🛠️🚗
Disclaimer

Our videos are for entertainment purposes only. It is recommended that you seek advice or help from a qualified professional while attempting any and all repairs.

Do-it-yourself repairs can involve risk and injury, we assume no responsibility or liability for losses, damages, or injuries that include but are not limited to direct, indirect, special, incidental, actual, consequential, or punitive. All repairs performed by our viewers are at your own risk.

While we do review products that we use daily or have even used for years, we also review and test products for companies that have compensated us to try their product out. We are independently owned, the opinions expressed are our own from personal experience while using any and all products.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Recommended products with links may be commission-based when products are purchased from them.