Inductive Kickback Power Hydrogen Generator

In this video, I demonstrate the use of a low-power back EMF generator that operates at 5 volts, drawing milliamps (40)ma of current from a 12-volt battery. By employing a voltage regulator,(not rectifier that's a tongue twister my video!!) the current is intentionally limited to maintain a low trigger current. This setup generates a high voltage back EMF of approximately 48 volts through the coil. Using a diode, I convert the negative spike of the back EMF into a positive spike, which is then directed to an electrolyzer for hydrogen generation.

The hydrogen gas produced is fed into a 9-volt fuel cell, where I only tap into the three-volt cell because it provides sufficient power for my pulse-driven oscillator. The oscillator generates a sharp pulsed DC similar to the back EMF spike, reaching high voltages of over 60 volts. This output is ideal for charging batteries, capacitors, or other projects. And is totally isolated avoiding traditional isolation loss.

One notable aspect of this setup is that the high voltage pulse generator(black block) and the hydrogen fuel cell operate with a minimal current requirement of around 1 milliamp. This approach eliminates the need for an isolation transformer or inverter to recycle power back into the battery, effectively addressing any power losses. With these separate systems working together, the issue of isolation is no longer a concern, allowing the direct feeding of this voltage back into the battery without any loss.

Forum:
http://typeright.social/forum

Please Help Support My Research: https://youtu.be/pYXETBB40j0