Solar Upgrade - Getting DC Power using the Victron Lynx Bus Bar System

We're moving along on the installation of the Victron 10kVA kit from Current Connected. In this video we're gonna wire up the Victron Lynx Bus Bar system and get DC power to our Victron Multiplus-II 5kVA inverters as well as our Victron MPPT 450V/100A Charge Controller.

Once we get everything installed, we'll put the inverters through their paces just like we did with the EG4 6500s. We will even see if these inverters have some of the same issues that the 6500s did.

Links to the parts & pieces in the video (affiliate links)
------------------------------------
Victron 48V MultiPlus-II 5kVA 120V Inverter
https://www.currentconnected.com/product/victron-48v-multiplus-2-5kva-120v-inverter-70a-charger/?ref=AzzpK9Fl

10kVA 120/240v Base Multiplus-2 System
https://www.currentconnected.com/product/10kva-120-240v-multiplus-2-5kva/?ref=AzzpK9Fl

Victron MPPT RS 450V/100A SmartSolar Charge Controller
https://www.currentconnected.com/product/victron-smartsolar-mppt-rs-charger-controller/?ref=AzzpK9Fl

Victron Lynx Components - Power In, Shunt and Distributor
https://www.currentconnected.com/product-category/victron/lynx/?ref=AzzpK9Fl

For more information, please check out my website with links to all the components, materials and products I have used in developing my off-grid solar system: https://going-off-grid.com

Supporting the Channel
--------------------------------------------------
There are several ways that you can help support this channel.
- Affiliate links help the channel by providing me with a small commission of the sale. It does not change the cost for you at all.
- The 'Buy me a Coffee' - link is here (on the bottom, right corner of the website): https://going-off-grid.com
- You can also click on the "Thanks" button under the video to support the channel.
- You can become a channel member and receive additional perks: https://bit.ly/3Wdufqv

Thank you for your support!

Chapters
--------------------------------------------------
0:00 Intro
1:21 Mounting the Lynx Bus Bar System
3:24 Wiring up the Lynx Distributor
8:52 Some Trouble Wiring up the Charge Controller
11:36 Continuing with the Lynx Distributor
18:42 Wiring up the Lynx Power-In
19:40 Powering Up the Lynx Bus Bar System
24:39 A Close Up of the Bus Bar System
24:55 Pre-charging Capacitors
29:51 Powering Up the Inverters!
32:16 Checking the Idle Capacity of the Inverters
33:00 A Hidden Surprise
33:55 Output Voltage Test
35:18 Powering on the Charge Controller
36:11 Checking the Idle Capacity of the Charge Controller
37:24 Idle Consumption Savings
39:00 Final Thoughts & Wrap Up

#diy #offgrid #solar #currentconnected #victron #multiplus

**** Disclaimer ****
Please remember, I'm just a DIYer like you. Don't take what I'm doing as gospel truth, it's just how I'm doing things. If you're unsure of how to do something, look into hiring a professional or at least consult with a professional to determine the correct way to do things.