15 Inch QuadCopter Rebuild – Part 1 of 2

In this video I’m connecting the main power wires and reinstalling the motors and their wires to the proper places. I also discover the root cause of my previous failure, which is the main long arm screws going directly through some of the motor wires. Consequence of trying to make it look clean and string the wires through the arms.

Music by <a href="https://pixabay.com/users/light_music-40074088/?utm_source=link-attribution&utm_medium=referral&utm_campaign=music&utm_content=174128">Alex Wit</a> from <a href="https://pixabay.com/music//?utm_source=link-attribution&utm_medium=referral&utm_campaign=music&utm_content=174128">Pixabay</a>

Parts I used for this build:

15 Inch Frame: yiyao 15inch FPV Racing Drone Frame
https://www.amazon.ca/dp/B0DQ8DMQMJ?ref=ppx_yo2ov_dt_b_fed_asin_title/

Flight controller : SpeedyBee F405 V4 BLS 60A 30x30 Combo Stack https://rotorvillage.ca/speedybee-f405-v4-bls-60a-30x30-combo-stack/

Motors: 4 × GEPRC EM2812 900KV Motor
https://rotorvillage.ca/geprc-em2812-900kv-motor/

VTX module: SpeedyBee TX800 5.8GHz 20x20 VTX (800mW)
https://rotorvillage.ca/SpeedyBee-TX800-5-8GHz-20x20-VTX/

VTX antenna: TrueRC Core 160mm SMA 5.8GHz Antenna - RHCP
https://rotorvillage.ca/truerc-core-160mm-sma-5-8ghz-antenna-rhcp/

FPV camera: Runcam Phoenix 2 Nano 1000TVL 2.1mm FPV Camera
https://rotorvillage.ca/runcam-phoenix-2-nano-1000tvl-2-1mm-fpv-camera/

Receiver: Radiomaster RP1 V2 TCXO ExpressLRS 2.4ghz Receiver
https://rotorvillage.ca/radiomaster-rp1-v2-tcxo-expresslrs-2-4ghz-receiver/

Props: HQ Prop 8X5 Light Grey Bi-Blade 8" (2CW+2CCW)
https://rotorvillage.ca/hq-prop-8x5-light-grey-bi-blade-8-2cw-2ccw/

Secondary Props: 2x HQ Prop 8X4X3 Light Grey Tri-Blade 8" (1CW+1CCW)
https://rotorvillage.ca/hq-prop-8x4x3-light-grey-tri-blade-8-1cw-1ccw/

LEDs: SkyStars RGB Motor Power LED board - 4 PCS
https://rotorvillage.ca/skystars-rgb-motor-power-led-board-4-pcs/

Motor LEDs (blue/red/pink): LED COB Strip - 5V / 1M
https://rotorvillage.ca/led-cob-strip-5v-1m/

GPS module: GEPRC M10 Nano GPS
https://rotorvillage.ca/geprc-m10-nano-gps/

Strobe Light: VIFLY Strobe (Anti-collision Light for Drones)
https://rotorvillage.ca/vifly-strobe-anti-collision-light-for-drones/