Motherboard Jumpstart: Easy Startup Guide!

today i'm going to show you how you can jump start a motherboard uh pretty simple if you don't have the um little switch plugged in or you're running like a little motherboard rig all by itself without a case and all the fancy bells and whistles first thing make sure your power supply is on plugged in and on baby all right once you do that You'll notice a light comes on on whatever motherboard you have now All you have to do is in your manual find out where the jumpers are like right here You can read see it says PWR and then reset which is Right there guys Right there so the power switch are those 2 pins on the other side so let's do it Let's jumpstart this thing I All you do come down and you want to jump those 2 pins Right there And that is it Starts right up

🔥 A little support goes a long way! If you’d like to help me keep creating, you can do so at https://ko-fi.com/roccotaco

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
As an Amazon Associate I earn from qualifying purchases.

DISCLAIMER: This channel is for entertainment purposes only. This is NOT Financial advice. Do your own research and never invest any money that you are not willing to lose.

All opinions are my own, sponsors are acknowledged. Links in the description are typically affiliate links that let you help support the channel at no extra cost.