Raspberry Pi Finding MAC Address

The C (Media Access Control) Address on the Raspberry Pi can easily be found using the terminal.
Type ifconfig at the prompt and hit enter.
eth0 is the wired ethernet port on the Raspberry Pi. The C address is located beside the 'ether' subject.
wlan0 is the WiFi ethernet on the Raspberry Pi. The C address is located beside the 'ether' subject.

Example:
pi@raspberrypi:~ $ ifconfig
eth0: flags=4099<UP,OADCAST,MULTICAST> mtu 1500
ether dc:a6:32:92:72:80 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,NNG> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 547 bytes 47978 (46.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 547 bytes 47978 (46.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

wlan0: flags=4163<UP,OADCAST,NNG,MULTICAST> mtu 1500
inet 192.168.1.133 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::fdd:f60c:eb79:e10c prefixlen 64 scopeid 0x20<link>
ether dc:a6:32:92:72:81 txqueuelen 1000 (Ethernet)
RX packets 13951 bytes 1493111 (1.4 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 16864 bytes 13550791 (12.9 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

Here is a link to using terminal mode on the Raspberry Pi.
https://www.raspberrypi.org/documentation/usage/terminal/

https://amzn.to/2Q9auRV
The starter kits come with everything that you will need to get started using your raspberry pi.
- Raspberry Pi 4 Model B 4GB RAM with 1.5GHz 64-bit Quad-core CPU
- USB-C Power Adapter Specially Designed for Raspberry Pi 4 B 4 GB RAM
- Set of 3 Premium Copper Heat Sinks Assures Excellent Thermal Delivery
- 32GB Class 10 MicroSD Card Preloaded with NOOBS
- LABISTS Premium Black Case (High Gloss) for Pi 4B
- LABISTS Mini Silent Fan
- Two Micro HDMI to HDMI Cables
- One LABISTS Screwdriver
- USB Card Reader Dongle
- LABISTS Raspberry Pi Quick-Start Guide
This low-cost small computer plugs into a computer monitor. A keyboard and a mouse can be attached via USB ports.

The Raspberry Pi has quickly become a fixture in the industrial environment when utilizing the internet of things. (IoT)
We will be utilizing this computer to poll and log information from our PLCs using Modbus and MQTT protocols.
Node-RED will be the IoT enabling software that will allow us to utilize this hardware.
https://accautomation.ca/series/node-red-iot-enabling-software/

Purchase Raspberry Pi 4 Starter Kit
Amazon U
https://amzn.to/3y1AAXZ
Amazon Canada
https://amzn.to/33ubjb1

Raspberry Pi 4 Specifications:
System-on-a-chip: Broadcom BCM2711
CPU: Quad-core 1.5GHz Arm Cortex-A72 based processor
GPU: VideoCore VI
Memory: 1/2/4GB LPDDR4 RAM
Connectivity: 802.11ac Wi-Fi / Bluetooth 5.0, Gigabit Ethernet
Video and sound: 2 x micro-HDMI ports supporting 4K@60Hz displays via HDMI 2.0, MIPI DSI display port, MIPI CSI camera port, 4 pole stereo output, and composite video port
Ports: 2 x USB 3.0, 2 x USB 2.0
Power: 5V/3A via USB-C, 5V via GPIO header
Expandability: 40-pin GPIO header

#shorts
ACC Automation
https://accautomation.ca/