Name: Click PLC to Stride Modbus TCP Remote IO
Uploaded: 2022-03-10T16:00:00+00:00
Duration: 26 min 47 s
Description: The Click PLC can use remote inputs and outputs from Stride. The Stride Field I/O Modules are simple and compact. They provide an economical means to connect inputs and outputs to an Ethernet Modbus T

3 years ago

260

acc automation automation direct plc click plc programming click plc programming software click plc tutorial plc software free plc training online stride field i/o click plc remote io click plc modbus remote io click plc to stride modbus tcp remote io

The Click PLC can use remote inputs and outputs from Stride. The Stride Field I/O Modules are simple and compact. They provide an economical means to connect inputs and outputs to an Ethernet Modbus TCP communication network. Every module operates as a standalone Modbus TCP server and can be configured via a built-in web server.
Previously we looked at the Stride Field Remote IO Modules Modbus TCP Ethernet wiring and configuration.
Stride Field Remote IO Modules Modbus TCP Ethernet
- Unboxing SIO MB12CDR and SIO MB04ADS Video
- Powering and Configuring Video
We will be connecting two Stride remote inputs and outputs to the Click PLC. Modbus TCP will be the protocol over Ethernet to communicate to the SIO-MB12CDR and SIO-MB04ADS units.
SIO-MB12CDR
- STRIDE discrete combo module, Input: 8-point, 12-24 VDC, sinking, Output: 4-point, relay, (4) Form C (SPDT) relays, 2A/point, (1) Ethernet (RJ45) port(s), Modbus TCP server.
SIO-MB04ADS
- STRIDE analog input module, 4-channel, current/voltage, 16-bit, isolated, input current signal range(s) of +/- 20 mA, input voltage signal range(s) of +/- 10 VDC, (1) Ethernet (RJ45) port(s), Modbus TCP server.
We will be reading an analog voltage into the Click PLC from the remote IO unit. We will then set an output to pulse on and off at a time range indicated by this analog signal. The output will be on the other remote IO unit and will trigger the input to signal. We will look at the Frequency, Count, and Status of this input. Our Click PLC program will also take into consideration watchdog (communication time out) and power-up events for the Stride remote input and output units.
Let’s get started!

More information can be obtained on our website. This includes all of the links mentioned in this video.
https://accautomation.ca/click-plc-to-stride-field-io-modbus-tcp

Stride Field Remote IO Modules Modbus TCP Ethernet
https://accautomation.ca/stride-field-remote-io-modules-modbus-tcp-ethernet
Stride Field Remote IO Modules Unboxing SIO MB12CDR and SIO MB04ADS
https://youtu.be/GbZNgcbVaLM
Stride Field Remote IO Modules Powering and Configuring
https://youtu.be/oVzWgkUn-D0

The entire Click PLC series can be found at this URL:
https://accautomation.ca/series/click-plc/

There are several reasons why we are using the Click PLC. Here are just a few.
- Investment is low for the hardware and the software is free
- Standalone PLC with built-in I/O
- Communication ability - Ethernet Port, RS232, RS485 - support for protocols such as Modbus RTU, Modbus TCP, etc.
- Ability to expand the system with a variety of modules including RTD and Thermocouple inputs directly.

https://www.accautomation.ca

Loading comments...