Honeywell Home Tuxedo: Setting Up Web Server & Remote Access

In this video, Michael from Alarm Grid shows you how to set up the web server for a Honeywell Tuxedo or Honeywell Tuxedo Touch Keypad for a Honeywell VISTA Security System. If you have a computer, a tablet, or any device connected to the internet on the same network as your Tuxedo Keypad, then you can access the Tuxedo's web interface and use it to control the Tuxedo, just like you would if you were at the Tuxedo itself.

Pretty much anything you can do from the Tuxedo web interface, you can also do from the actual Tuxedo. You can use the web interface to arm and disarm your system. You can access Console Mode to program your system and make system changes, You can even control any programmed Z-Wave automation devices. But the one thing you cannot do is enroll or delete Z-Wave devices. The only way that you can add and remove automation devices is to do so locally at the Tuxedo Keypad itself. Remember that when adding a new Z-Wave device, you should clear it from the network first. This will wipe out any residual Z-Wave network data and ensure that it can pair successfully. This is just a general rule that applies to most Z-Wave devices.

https://www.alarmgrid.com/faq/how-do-i-set-up-the-web-server-or-remote-access-feature-for-the-

http://alrm.gd/get-monitored