Remove All Devices Button On IQ Panel 2

In this video, Michael from Alarm Grid shows you the Remove All Devices button in the Z-Wave Devices Menu for the Qolsys IQ Panel 2 Plus. The Remove All Devices button is essentially a Z-Wave reset button, and it clears all Z-Wave devices from the IQ Panel 2 System. This button is typically only used as a last resort troubleshooting option when multiple Z-Wave devices are not working properly. It may also be used if the user plans on giving away or selling their IQ Panel 2 System, and they want the new user to start fresh and have the panel cleared of Z-Wave devices.

After clearing all Z-Wave devices, you will need to re-enroll any Z-Wave device that you want to continue using with the system. The devices will still think that they are actively paired with a network, so you will need to use the Clear Device function and clear them from the network before adding them. Remember, using the Remove All Devices function merely resets the panel's Z-Wave controller. It doesn't necessarily tell the Z-Wave devices what is going on. Keep in mind that Z-Wave devices are smart, and if they think that they are still paired with a controller, then they will not be able to re-enroll successfully.

Accessing the Remove All Devices button is quite easy. From the main screen of the Qolsys IQ Panel 2, click the small grey bar at the top of the screen. Then choose Settings, followed by Advanced Settings, and then enter the Installer Code. The default Installer Code for a Qolsys IQ Panel 2 System is 1111. From there, choosing Installation, then Devices, then Z-Wave Devices. You should see the Remove All Devices button in the menu. After clicking it, the IQ Panel 2 will ask you if you want to clear all Z-Wave devices. Upon clicking OK, the system will begin removing all programmed Z-Wave devices. The process may take a few minutes to complete.

https://www.alarmgrid.com/faq/what-is-the-remove-all-devices-option-for-the-qolsys-iq-panel-2-

http://alrm.gd/get-monitored