Program SiXCT to Lyric Controller

In this video, Michael from Alarm Grid shows you how to program the Honeywell SiXCT to the Honeywell Lyric Alarm System. The device is part of the Honeywell SiX Series of wireless sensors that are designed exclusively for use with the Lyric. The Honeywell SiXCT in particular is a door and window contact sensor that will let your system know when a door or window is opened.

As a SiX Series device, the Honeywell SiXCT uses 128-bit AES encryption, and it has a wireless range of roughly 300 nominal feet. In addition to being used as a standard door and window contact sensor, the SiXCT can also be used as a wireless transmitter for a single hardwired contact. When using the SiXCT as a regular contact, the magnet should be installed on the moving portion of the door or window, while the sensor should be on the stationary door or window frame.

The Honeywell SiXCT has an enrollment light that helps you with troubleshooting. When the green LED light is blinking quickly, it means that the device has not yet been enrolled. When it is blinking slowly, the device is actively paired with a system. The Honeywell SiXCT can only be paired with one (1) system at any given time. For power, the device uses a single CR123A camera battery. It can be mounted using screws or double-sided foam tape.

Honeywell also offers the SiXMINICT, which is a smaller version of the SiXCT. The Honeywell SiXMINICT has a slightly smaller wireless range of 200 nominal feet, and it lacks the auxiliary input for integrating a wired contact and having the sensor act as a wireless transmitter. However, some users prefer the smaller and more compact design of the SiXMINICT, which makes it more difficult to notice when the sensor is surface-mounted on a door or window.

https://www.alarmgrid.com/faq/how-do-i-program-a-sixct-to-the-lyric-security-system

http://alrm.gd/get-monitored