Location of the Enrollment Button on the DSC PG9944

In this video, Michael from Alarm Grid shows the location of the enrollment button on the DSC PG9944 PowerG Outdoor Image Sensor. This enrollment button is in the battery compartment. You must remove two (2) device covers to access it. Accessing this enrollment button is needed to enroll the sensor.

Like most wireless sensors, the DSC PG9944 can be auto-enrolled with a security system. Auto-enrolling is recommended, as it prevents you from making a mistake if you had to manually enter the device's serial number. In order to auto-enroll the PG9944, you must first access the battery compartment. This will require a Phillips head screwdriver. You should then put your panel into its auto-enrollment mode. You will need to press and hold the enrollment button on the sensor until the LED light turns solid orange. You can then release the button, and the panel will allow you to auto-enroll it. You will then need to configure the settings for the zone. The sensor is typically programmed like any standard motion sensor.

When auto-enrolling the PG9944, you will need to have the batteries inserted so that the sensor can transmit signals. The space between the batteries and the enrollment button is very thin, so you will likely need a thin object to press and hold the button. Something like a small screwdriver or a pen can work pretty well. The device will enroll the system as a motion sensor. The only difference is that the device will take photos when it triggers and alarm on the system. The first of these images will be made viewable from Alarm.com for remote viewing. You can access Alarm.com from a web browser or from the mobile app to view that image. This is great for checking in and making sure that an alarm is legitimate.

https://www.alarmgrid.com/faq/where-is-the-enrollment-button-on-the-pg9944

http://alrm.gd/get-monitored