Sensor Groups on the IQ Panel 2 - Overview

In this video, Joe discusses the Sensor Groups available on a Qolsys IQ Panel 2 Alarm System. The Sensor Group assigned to a system zone determines how the system responds when the associated sensor is activated. The setting is very similar to the Response Type option found on most Honeywell Panels.

In order for a sensor to work with an IQ Panel 2, it must first be programmed. Part of this programming process involves assigning a Sensor Group. Based on this setting, the system will respond a unique manner when the sensor is activated. For example, if the Sensor Group is set to Instant Perimeter, then an immediate alarm will occur if the sensor is faulted while the system is Armed Away or Armed Stay. It is crucial that the Sensor Group option for each zone is configured correctly, or else the system will not work properly.

It is important to note that not all Sensor Group options will be available for each device type. For instance, a Sensor Group designed for with a security key fob will most likely be unavailable for a zone used with a door and window contact or a glass break sensor. When programming a new sensor, you should set the Sensor Type to see which Sensor Group options are available. You will also use programming to set the Sensor Name, Chime Type, Voice Annunciation and the signal source. You must remember to save the changes for any new sensor that is added.

After you add a new sensor, it is always a good idea to test it. This will allow you to make sure that the system responds the way it should. You may have to put the system into its test mode with the central monitoring station when doing this. Placing your system in test mode can help prevent any false alarms from occurring.

http://alrm.gd/get-monitored