C-More Micro HMI First Program Part 2

Previously we put our first program (Video) into the C-More Micro HMI Panel using the C-More Micro programming software. The Do-More Designer Simulator was used with a modified Start Stop Jog Circuit so we can use our HMI screen to control the output as well as the inputs on the PLC. This communication was done via Ethernet with the Modbus TCP protocol.
We will now look at PLC to Panel and Panel to PLC communications. This will allow us to control the screen page number, beeper, and backlight of the panel from the PLC. We will also get notifications of the same as well as key press information from the HMI panel. Let’s get started.

More information can be obtained on our website. This includes all of the links mentioned in this video.
https://accautomation.ca/c-more-micro-hmi-first-program-part-2

Previously we have discussed the following in our C-More Micro HMI Panel:
System Hardware
http://accautomation.ca/c-more-micro-hmi-system-hardware
Unboxing and Review Video
https://youtu.be/_uCcALMqYlM
Installing the Software
http://accautomation.ca/c-more-micro-hmi-installing-the-software
Installing the Software Video
https://youtu.be/BIGrOvxlDTI
- Update Automation Direct Software C More Micro Software Video
https://youtu.be/MNjTpirZs1s
System Setup Screens
http://accautomation.ca/c-more-micro-hmi-system-setup-screens
System Setup Screens Video
https://youtu.be/KolqJkKKhaA
First Program
http://accautomation.ca/c-more-micro-hmi-first-program
First Program Video
https://youtu.be/FsUe-b3JSns

There are several reasons that we are using the EA3-T4CL C-More Micro Panel. Here are a few:
• Touch screen display
• Free downloadable programming software
• 482 x 272-pixel display (WQVGA) with up to 40 lines by 80 characters of text and graphics
• 32K colors
• 14MB memory
• Built-in USB type Micro-B programming port
• Built-in RJ45 Ethernet Port
• Built-in 15-pin serial communications port
• Built-in RJ12 serial communications port
• Built-in Alarm Control setup that activates beep, back-light flash, customized alarm banner, and red LED blinking
• 0 to 50 °C (32 to 122 °F) operating temperature range (IEC 60068-2-14)
• NEMA 4/4X, IP65 compliant when mounted correctly, indoor use only
• UL, cUL & CE agency approvals
• 2-year warranty from date of purchase

http://www.accautomation.ca